Customization: | Available |
---|---|
After-sales Service: | Install Guidance |
Type: | Artificial Granite |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1. High Realism
Manufactured using advanced techniques, cultural stone replicates the textures, colors, and details of natural stone, providing a unique and authentic decorative effect.Indoor Installation Process (Using Interior Adhesive) | 1. Surface Preparation Clean the wall surface thoroughly to remove dust and debris. If applying on existing walls, ensure that paint, wallpaper glue, and oil residues are completely removed to achieve a firm bond. 2. Applying Adhesive Use a notched trowel to spread interior adhesive evenly on the wall, maintaining a thickness of approximately 5mm. To prevent the adhesive from drying too quickly, apply it over an area of at least 1 before placing the tiles. Note: Interior adhesive should only be used indoors under normal temperature conditions. Avoid using it in high-heat areas (e.g., near fireplaces) or where temperatures exceed 60°C. 3.Tile Installation Firmly press each tile into place, ensuring that the adhesive squeezes out from all sides. Start from the corners for a natural and seamless look. Arrange tiles to balance colors and textures, avoiding clusters of similar shades. Adjust spacing as needed to accommodate size variations. 4.Grouting Process Use a damp brush to lightly press and shape the grout lines, adjusting the depth as necessary. Avoid excessive water, as it may cause cracking in the adhesive. Grouting should be done immediately after every 1m2 of tile installation. Repeat steps 2, 3, and 4 until completion. 5.Removing Excess Adhesive Once the adhesive has fully dried, use a brush to clean off any remaining residue from the tile surfaces. |
Outdoor Istallation Process (Using Special Bonding Mortar) | 1.Surface Preparation Use concrete prefabricated bricks to clean the wall surface, removing dust and debris. Note: If the base is wood, install a metal mesh and create a mortar foundation before proceeding. 2.Applying Bonding Mortar After surface preparation, apply a dual-purpose bonding mortar suitable for both base and finishing layers. Special bonding mortar should be used for the application. First, apply a 1-2mm thick layer of mortar on the base, followed by an additional 2-3mm thick layer. Before installing tiles, ensure that at least 1 m2 of the surface is pre-coated with mortar to prevent premature drying. 3.Tile Installation Spread a layer of mortar on the back of each tile. Firmly press the tile against the surface until mortar oozes out from the edges. Begin installation from the corners for a more natural finish. 4.Grouting Avoid allowing grout to smear onto the tile surfaces. Fill joints up to 70% to leave room for final adjustments. 5.Final Touches Use professional jointing tools to smooth the grout for a refined appearance. 6.Waterproofing Treatment For exterior applications, allow the mortar to cure for one week before applying a waterproof sealant. This step enhances weather resistance and durability. |
Comparison Criteria | Natural Stone | Our Eco-Stone |
Density (g/cm³) | 2.3-2.5 | 1.7-1.9 |
Flexural Strength (MPa) | ≥3 | ≥5 |
Compressive Strength (MPa) | Type I (Sandstone): ≥12.6 Type II (Quartz Sandstone): ≥68.9 Type III (Quartzite): ≥137.9 | ≥35 |
Water Absorption (%) | ≤10 | 7-10 |
Frost Resistance | Not specified | Exceeds national standards for severe cold regions |
Abrasion Resistance | High | Comparable to natural stone, superior to regular sandstone |