| CAS No.: | 54650-50-9 |
|---|---|
| Formula: | C3h4o2 |
| Color: | Customized |
| Appearance: | Liquid |
| Main Raw Material: | Acrylic |
| Method: | Roller |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier This ceramic stone paint is a product that uses DOW high-environmental-protection odorless emulsion, combined with high-temperature burned quartz colored sand. It has the product characteristics of ceramic's stain resistance, wear resistance, long-lasting color retention, and rich colors. Through the scientific formulation of inorganic and organic nanotechnology, the product meets international environmental standards. It does not contain radioactive elements, has ultra-low VOC, luxurious effect, natural particles, and a heavy texture. It is one of the most promising ecological wall materials in modern interior decoration.
Main Features:
| Scope of Application | Widely used for wall decoration in high-end star hotels, villas, residential apartments, government buildings, etc., especially suitable for old wall renovation. |
| Packing | 25kg color-printed iron drum/plastic drum. Other packaging: stone paint 50kg/75kg; Primer/Topcoat: 18kg/15kg |
| Storage | Indoor at 5°C-25°C, the storage validity period starts from the date of packaging, and the validity period is 12 months. |
| 1. Basic Treatment: The base surface should be flat, dry, without floating ash, without grease, water content < 10%, PH < 10. For porous, rough, and powdered walls, remove the floating ash and re-scrape with cement. |
| 2. Bottom coating: Use our acid-resistant, alkali-resistant, and salt-resistant sealing primer to seal the bottom to ensure that the entire surface does not alkali or bloom after the main coating is sprayed. Theoretical dosage: 0.12-0.2kg/m. |
| 3. Grid: According to the process requirements, use the seam tape to divide the wall into the required graphics. |
| 4. Main coating: Use a special spray gun for spraying, air pump pressure 0.8-1.0mpa, when the coating is thicker, spray it in two times. Theoretical dosage: 3.5-5kg/m. |
| 5. Topcoat: After the main coating is completely dry, use a spray gun to spray or roll the surface coating. Theoretical dosage: more than 0.12-0.2kg/m. Application humidity: >5C, relative humidity <80%, avoid construction in rainy and windy weather. The interval between application times on the same wall should not be too long to avoid color difference. If there is seam tape on the wall, it should be removed after the main coating has just been sprayed and dried for 0.5-2 hours. |
| Application method | Scrape coating (preferred) |
| Application conditions | The minimum application temperature is not less than 5°C, the environmental humidity is less than 85%, the wall water content is less than 10%, the wall alkalinity PH value is less than 10. |
| Supporting System |
Base surface treatment - scrape environmentally friendly water-resistant putty (1-2 times) - seal primer (1 time) - ceramic colored stone paint (first time) - ceramic colored stone paint (second time to level) - stain-resistant self-cleaning topcoat (1-2 times) |
| Reference dosage |
2.5-4kg/m (the specific dosage of the main material is related to the thickness of the coating) |
| Other Notes | Ensure a good ventilation environment during use and drying. This product is non-corrosive. Avoid direct contact with sensitive skin. Use appropriate protective equipment when stained and clean with water in time. Store at 5°C-35°C, sealed storage in a cool and dry place. This product is non-toxic, not easy to burn, shelf life is 12 months. |
| The State in the Container | After stirring, it is uniform without agglomeration |
| Application Property | Spray twice without abnormality |
| Dry Time (Touch Dry) | ≤4 Hours |
| Dry Time (Hard Dry) | About 3-7 Days |
| Color & Appearance | No Obvious Difference Than the Samples |
| Water Resisting (96 Hours) | No foaming, no peeling, no cracking, no softening material precipitation |
| Alkali Resistance (96 Hours) | No foaming, no peeling, no cracking, no softening material precipitation |
| Soil Resistance | ≤ Level 2 |
| Bonding Strength | ≥ 1 Mpa |
| Resistance to Freeze-Thaw Cycles (5 Times) | No foaming, no peeling, no cracking |
| Weather Fastness (500 Hours) | No foaming, no peeling, no cracking |
| Interior Packing | Plastic bucket or Metal bucket |
| Exterior Packing | Pallet or Crate |
| Bucket Size | 20kg, 10kg, 5kg, 2kg & 1kg |
| Crate Size | 36 buckets x20kg ≈ 1.5CBM; 44 buckets x 20kg ≈ 2 CBM |
We are a renowned enterprise specializing in the production of water-based coatings. Our headquarters are located in Xiamen, Fujian, China, with 20 years of industry experience and numerous international certifications such as ISO, CE, etc.
So far, our products have made unique contributions in the field of water-based coatings, covering architectural coatings, industrial anti-corrosion coatings, floor coatings, insulation, fireproofing, waterproofing, and special custom coatings.
In China, we have undertaken numerous large-scale government projects, including municipal buildings, commercial buildings, sports venues, bridges, subsea tunnels, and offshore platforms. The excellent quality and technical support of our coatings have earned the trust of users from all walks of life, repeatedly proving their reliability and effectiveness.
With rich application experience and innovative products, we offer customization and solutions for various water-based coatings to meet the needs of customers in various industries. Integrity, innovation, and mutual benefit are our business philosophies. As we continue to innovate and develop, we look forward to cooperating with customers from all over the world.
Q1: What is your minimum order quantity?
The minimum order quantity is 1kg, and we accept orders for different products to be mixed and shipped together.
Q2: Which port is closest to you?
The nearest port to our factory is Xiamen Port, and we can also ship products to Guangzhou, Shenzhen, Yiwu and other ports.
Q3: Can you provide samples?
Yes, we provide free samples, you only need to pay the shipping cost.
Q4: Can you do OEM?
Yes, we can do branding, logo and different packaging sizes according to your requirements.
Q5: Can you produce products according to different requirements?
Yes, we have our own R&D team, tell us your requirements and we can develop it together.
Q6: Where is your factory?
It is located in Xiamen City, Fujian Province, and warmly welcomes you to visit us.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}